Fluke 437-II, 3-Phase 400 Hz Power Quality Kit

Fluke 437-II 400 Hz Three-Phase Power Quality and Energy Analyzer

Features

Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).

Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.

PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).

Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up.

Automatic Transient Mode: 435 and 437 Series II analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV.

Fully Class-A compliant: 435 and 437 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.

Mains signaling: 435 and 437 Series II analyzers measure interference from ripple control signals at specific frequencies.

400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems.

Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.

Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.

Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.

Automatic Trending: Every measurement is always automatically recorded, without any set-up.

System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.

Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.

View graphs and generate reports: With included analysis software.

Battery life: Seven hours operating time per charge on Li-ion battery pack

INCLUDED

C437 Hard Case with rollers

BC430 Power Adapter

International plug adapter set

BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)

TL430 Test lead and Alligator clip set

WC100 color coding clips and regional decals

i430flex-TF, 24 inch (61cm) length, 4 clamps

8 GB SD card

PowerLog on CD (includes operator manuals in PDF format)

USB cable A-Bmini